Cut A Hole In Office Cubicle Walls – Cut a hole in the cubicle wall need not be an act of sabotage workplace. It can be a form of rerouting cables, connecting the electronics outlets or greet your neighbor. Depending on the material of the cubicle wall, cut a hole can be fairly easy, or may be impossible. With the right tools, it should be possible to make minor modifications in many cubicles.
Identify the material of your office cubicle walls. If the wall is made of fabric or fabric with a corkboard center, it will be easy to cut. If the wall is laminated or glass, it is impossible to make a hole with the tools available for most artisan’s source. If your cubicle wall is soundproof, you have more padding than other similar cubicles walls. Draw the whole area you want to cut on both sides of the cubicle wall with a permanent marker. Insert the knife blade on the contour path in the cubicle wall. Check if the knife has penetrated through the other side of the cubicle wall.
12 Photos Gallery of: Cut A Hole In Office Cubicle Walls
Shorten the traced outline of the hole with the knife. If the cubicle filling is cut resistant, making a sawing motion with the knife. If the knife does not penetrate all the way through the office cubicle walls, cut the outline drawn on the other side of the cubicle wall too. Press the cutting area through the far cubicle wall part. Be sure to remove all foam, cork board or other fillers cubicle. Clean any debris in the hole. Cut ends losing any fabric so that the hole is clean. The hole is completed.